Tripp Lite MODBUSCARD User Manual

Owner’s Manual
Programmable MODBUS Card
Model: MODBUSCARD
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
Introduction 2
Features 2
Configuration 2
Installation 6
Operation 6
Warranty and Product Registration 20

Tripp Lite MODBUSCARD Specifications

General

Brand	Tripp Lite
Model	MODBUSCARD
Category	Computer Hardware
Language	English

Summary

Configuration of the MODBUS Card

Configuration Switches and LEDs

Details the MODBUS Device ID, RS-232, RS-422/485 configuration switches and diagnostic LEDs.

Communication Terminal Strip Pinouts

Details wiring pinouts for RS-232, RS-485, and RS-422 connections on the terminal strip.

Device ID Configuration

Explains setting a specific ID for MODBUS device recognition using SW1.

Device ID Configuration Examples

RS-232 Port Configuration

Explains how to configure the RS-232 interface using switch SW2 for baud rate and parity.

RS-422/485 Port Configuration

Details how to configure the RS-422/485 interface using switches SW3 and SW4.

Installation of the MODBUS Card

Installation Procedure

Step-by-step guide for installing the MODBUSCARD into a SmartOnline UPS system.

Operation of the MODBUS Card

Discrete Inputs

Lists discrete input descriptions, addresses, and their corresponding values (0 and 1).

Coils

Details coil descriptions, addresses, and their corresponding ON/OFF values for device control.

Holding Registers

Input Registers

Battery Status

Input Status

Output Status

Bypass Status

Temperature Status Details

Power Module Attributes

Power Module General and PFC Status

Power Module Inverter and Charger Status

Power Module Temperature Status

Power Module Inverter Voltage