Tritech PA200 - Page 8

Specification Altimeter Product Manual
0286-SOM-00001, Issue: 09 8 © Tritech International Ltd.
PA200/PA500 Right Angle Delrin, Aluminium & Stainless Steel
196
Ø47
225
A B C
Not to scale, dimensions in mm.
Note
The transducer endcap (part C in the image) is made out of ABS regardless of
the body material.
Note
The standard Tritech International Ltd 6-pin connector is rated to a maximum
depth of 4000m, so any deep rated altimeters (up to 6800m) will be fitted with
different connectors, the Burton 5506 shown here is a representation only.
PA200/PA500 Right Angle Stainless Steel
196
213
Ø43
Ø47
A B C
Not to scale, dimensions in mm.
Note
The transducer endcap (part C in the image) is made out of ABS regardless of
the body material.