Need help?Do you have a question about the Tritech PA200 and is the answer not in the manual?
General| Brand | Tritech |
|---|---|
| Model | PA200 |
| Category | Measuring Instruments |
| Language | English |
Outlines specifications for standard altimeters and mentions various connector options.
States the right to change designs and specifications as part of product development.
Details electrical and acoustic parameters for PA200 and PA500 altimeters.
Covers materials, weights, depth ratings, and operating temperatures for PA200/PA500.
Details electrical and acoustic parameters for the LRPA altimeter.
Covers physical and environmental specifications for the LRPA altimeter.
Details electrical and acoustic parameters for the Dual Frequency Echosounder.
Covers physical and environmental specifications for the Dual Frequency Echosounder.
Describes altimeters as sonar ranging devices for measuring subsea distances.
Advises mounting altimeters vertically and away from interference sources.
Caution against copper alloys and recommends insulation for metallic clamps.
Covers orientation, sensor axes, and mounting for the Dual Frequency Altimeter.
Warns against long-term submersion for stainless steel altimeters due to corrosion.
Provides diagrams for various communication and power pin configurations.
Illustrates wiring for RS232, RS485, and Current Loop test cables.
Explains serial and analogue data output formats and potential issues in air.
Details serial output formats (2P3, 3P2, 3P3, NMEA $DBT) and their structure.
Covers altitude and attitude output, interrogation methods, and AHRS output.
Details connecting altimeters to SeaKing/Super SeaPrince DST via AUX port.
Explains connecting altimeters to SeaKing 700 Series (Bathy) devices.
Describes the AltTest program for communication, display, and logging of altimeter data.
Covers washing, inspection of o-rings, and general care to prevent damage.
Explains how to identify the altimeter and contact Tritech for replacement parts.
Provides step-by-step instructions for disassembling and re-assembling the altimeter.
Lists aspects like physical hardware, analogue control, and output fixed at manufacture.
Describes generic dip switch settings for altimeter configuration.
Details jumper configurations for ARCNET sonar with RS485 altimeter.
Details jumper configurations for RS232 sonar with RS485 altimeter.
Details jumper configurations for ARCNET sonar with RS232 altimeter.
Details jumper configurations for RS232 sonar with RS232 altimeter.
To Next Page