Triton Safeguard+ User Manual

Remote Start Stop
Artwork No:
Pantone ref:
Drg ref:
Scale:
Designed:
Date:
Revision
PROPERTY OF TRITON PLC-CONFIDENTIAL INFORMATION. REPRODUCTION OF DATA IS
PROHIBITED, WITHOUT PRIOR WRITTEN CONSENT FROM TRITON SHOWERS.
Composite
1:1
1
T06305001
7054506, 7054501
MG
17.01.14
Fig.1
1
2
3
User Instructions
2181072 A - March 2014
Do not use abrasive or solvent cleaning fluids. The Remote
Start/Stop should be cleaned using a soft cloth and warm
water.
MAIN COMPONENTS
Component Pack
1 Remote Start/Stop and 5m cable
2 Wall bracket
3 Cover Screw
Using The Safeguard
+
Remote Start/Stop
To start the shower using the remote
Press the Remote Start/Stop button and immediately the
shower will activate and water will begin to flow. An audible
bleep will be heard from the shower upon start up (if option is
selected.)
To stop the shower using the remote
Press the Remote Start/Stop button. An audible bleep will be
heard from the unit and water will cease to flow.
(If the timed shutdown option is selected 1 bleep will be heard
to inform the user that they have 1 minute of showering time
remaining. Finally 5 bleeps will sound to alert the user to the
end of the showering time before the unit switches off.)
Cleaning The Safeguard
+
Remote Start/Stop
Fig.1

Triton Safeguard+ Specifications

General

Brand	Triton
Model	Safeguard+
Category	Remote Control
Language	English

Summary

Safeguard Remote Start/Stop Operation

Starting the Shower Remotely

Press the button to activate the shower and water flow. An audible bleep confirms start.

Stopping the Shower Remotely

Press the button to cease water flow. Includes timed shutdown bleep alerts.

Cleaning the Remote Unit

Use a soft cloth and warm water for cleaning. Avoid abrasive or solvent fluids.

Safeguard Remote Start/Stop Installation

Electrical Connections and Cable Routing

Wiring diagrams and options for routing the control cable through the wall.

Shortening the Control Cable

Instructions for shortening the 5m cable, with warnings about specific connector sections.

Remote Unit Siting and Safety

Details IPX4 rating and suitable placement zones for the remote unit.

Cover Screw and Warranty Information

Warning on using the correct screw to maintain product warranty and specifications.

Fitting the Control Panel Bracket

Step-by-step guide to mounting the wall bracket and attaching the remote unit securely.