4
Model number: TPT125
Voltage:
120V~, 60Hz
Power: 15A
Cuts per min: 17500min
-1
No load speed: 8750min
-1
Planing height:
1
⁄8 - 6"
Planing width: 12
1
⁄2"
Minimum planing length: 15"
Table size: 12
1
⁄2" x 33-6/10”
Insulation:
Ingress Protection: IP20
Weight: 49lbs
Note: Imperial conversions are approximate.
Sound and vibration information:
Sound pressure L
PA
: 90.9dB(A)
Sound power L
WA
: 103.9dB(A)
Uncertainty K 3dB
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
Specification
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Read instruction manual
Wear protective clothing
Class I construction (protective earth)
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries.
Be aware of kickback!
For indoors use only!
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
WARNING
LIFTING HAZARD
Single Person Lift could cause injury
Use assistance when moving or lifting
WARNING: This product is heavy and as a precaution it is advised
that two people assemble the machine.
Conforms to relevant legislation and safety standards.
Description of Symbols
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Introduction
Original Instructions
V Volts
Hz Hertz
~, AC Alternating current
, DC Direct current
A, mA Ampere, milli-Amp
W, kW Watt, kilowatt
n
0
No load speed
/min or min
-1
Operations per minute
Ø Diameter
° Degrees
dB(A) Decibel sound level (A weighted)
m/s
2
Metres per second squared
(vibration magnitude)
Technical Abbreviations Key
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
636949_Manual.indd 4 28/02/2019 12:15
To Next Page
Loading...
Need help?
General
