It is dangerous to operate the motorcycle with defective brakes; you must have your
authorised Triumph dealer take remedial action before you ride the motorcycle again.
Failure to take remedial action may result in reduced braking efficiency leading to loss
of motorcycle control and an accident.
• Check for correct brake operation.
ABS Hydraulic Modulator/ECM – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
To prevent paint damage, do not spill brake fluid onto any area of the bodywork.
Spilled brake fluid will damage paintwork.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Fuel Tank - Removal
• Evaporative Canister - Removal
• Rear Wheel - Removal
To Next Page
Loading...
