Triumph Rocket 3 GT 2021 - Page 1457

1417
Cooling Fan Controller – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Coolant Expansion Tank - Removal
• Radiator - Removal
1. Disconnect the cooling fan from the main harness and detach its electrical connector
from the bracket.
NOTICE
Note the positions and orientations of the grommets, flanged sleeves and washers for
installation.