Triumph Rocket 3 GT 2021 - Page 1460

1420
Heated Grip - Removal (if fitted)
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
For the removal of the heated twist grip see Heated Twist Grip - Removal.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Mirrors - Removal
NOTICE
Note the orientation of the heated grip wires prior to removal of the heated grip.
1. Release the two fixings and remove the heated grip switch housing cover from the
left hand grip. Collect the two fixings.
1. Left hand handlebar grip
2. Fixings
3. Heated grip wire