Triumph Rocket 3 GT 2021 - Page 1469

1429
Ignition Master Switch (US Markets Only) – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Fit the ignition master switch to its bracket and tighten the fixings to 1.5 Nm.
1. Fixings
2. Ignition master switch
Perform the following operations:
• Plenum - Installation (US Markets Only)
• Fuel Tank - Installation
• Battery - Installation
• Seat - Installation