Exhaust fumes are poisonous, always operate a motorcycle in the open-air or in an
area with adequate ventilation.
Do not operate a motorcycle in an enclosed area without adequate ventilation.
Operating a motorcycle in an enclosed area without adequate ventilation can cause
loss of consciousness and death within a short period of time.
If necessary, the neutral position can be re-adapted simultaneously with the shift force
sensor re-adaption (see Neutral Position Adaption).
To re-adapt the shift force sensor:
1. Ensure the transmission is in neutral.
2. Start the engine.
For successful and accurate adaption, The engine must be at normal idle speed and
the gear change pedal must be in its normal rested position.
During adaption, do not raise the engine speed and do not touch or move the gear
change pedal.
3. The shift force sensor will adapt shortly after engine start provided the above
conditions are met.
4. The adaption status can be confirmed by selecting TRIUMPH SHIFT ASSIST ADAPTION
STATUS on the Triumph diagnostic tool.
5. Turn the ignition OFF for at least 60 seconds to allow the adaption settings to be
stored in ECM memory.
To Next Page
Loading...
