Triumph Rocket 3 GT 2021 - Page 847

809
Manifold Absolute Pressure (MAP) Sensor – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Fuel Tank - Removal
NOTICE
Note the routing of the MAP sensor hose for installation.
1. Release the fixing and detach the MAP sensor from its mounting. Discard the fixing.
2. Disconnect the MAP sensor hose, the electrical connector and remove the MAP
sensor.
1. Fixing
2. MAP sensor
3. Connector
4. Hose