Triumph Rocket 3 GT 2021 - Page 868

830
7. Fit the starter motor solenoid bracket to the relay bracket and secure with the push
release plastic rivet.
8. Fit the relay cover
1. Relay cover
2. Starter motor solenoid bracket
3. Push release plastic rivet
Perform the following operations:
• Fuel Tank - Installation
• Battery - Installation
NOTICE
If a new keyless ECM has been fitted, the new ECM and keys must be paired.
• If a new keyless ECM is fitted it will have to be setup, see Setup Flow Chart -
Replacement Keys and Keyless ECM - Models with an Electronic Steering
Lock Fitted.
• Seat - Installation