5
Time Range 1min-99hrs59min
Fuse Type slow fuse 2A 250V
Dimensions 242.5(W)*111(D)*126.5(H) mm
Weight 1.7kg
Power Supply
AC power supply 100-240V 50/60Hz
Input power 50VA
DC power supply DC 12V
Battery
Specifications
Specification: 7.4V 2500mAh
Charging time: 5h. (under OFF status)
Working time: over 9h. (after completely charging the new battery, when the
environment temperature is 25℃ and flow rate is 5ml/h, the constantly working
time)
Alarm
Alarm signal sound
pressure level
When the sound is set at lowest level, alarm signal sound pressure level
≥50dB(A)
When the sound is set at highest level, alarm signal sound pressure level
≤80dB(A)
Alarm information
VTBI near end, Syringe near empty, VTBI infused, Syringe empty,
Pressure high, Battery nearly empty, Battery empty, no battery inserted, Battery
in use, Check syringe, Reminder alarm, Standby time expired, KVO finished,
Drug limit exceeded, Maintenance Reminder
Environment
Non AP/APG type
equipment
Do not use it in the environment with inflammable anesthetic gas mixed with air,
and inflammable anesthetic gas mixed with oxygen or nitrous oxide
Operating
(1) temperature: 5-40℃
(2) humidity: 15-95%, non-condensable
(3) atmospheric pressure: 57-106kPa
Transport & Storage
(1) temperature: -20-60℃
(2) humidity: 10-95%, non-condensable
(3) atmospheric pressure: 50-106kPa
To Next Page
Loading...