109
Maintenance and Adjustment
Speed Triple R
1. Compression damping adjuster
The compression damping adjuster is
coloured gold and is situated close to the rear
suspension reservoir.
To adjust the rebound damping setting, rote
the adjuster clockwise to increase rebound
damping and anti-clockwise to decrease.
Always count the number of clicks anti-
clockwise from the fully clockwise position
noting that the first stop (click position) is
counted as zero.
Note:
• The motorcycle is delivered from
the factory with the compression
damping set at 17 clicks from the
fully clockwise position.
All Models
1
chcx_1
The rear suspension unit spring pre-load is
not rider adjustable. Any attempt to adjust
the spring pre-load could result in a
dangerous riding condition leading to loss
of control and an accident.
To Next Page
Loading...
