108
Maintenance and Adjustment
Pseed Triple R
1. Rebound damping adjuster
The rebound damping adjuster is accessible
from the left hand side of the motorcycle. It is
coloured black and is situated close to the
rear suspension reservoir.
To adjust the rebound damping setting, rote
the adjuster clockwise to increase rebound
damping and anti-clockwise to decrease.
Always count the number of clicks anti-
clockwise from the fully clockwise position
noting that the first stop (click position) is
counted as zero.
Note:
• The motorcycle is delivered from
the factory with the rebound
adjuster set at 10 clicks from the
fully clockwise position.
Compression Damping Adjustment
Speed Triple
1. Compression damping adjuster
The compression damping adjuster is
accessible from the left hand side of the
motorcycle. It is situated below the rear
suspension unit reservoir.
To adjust the compression damping setting,
rotate the slotted adjuster clockwise to
increase, or counter-clockwise to decrease.
Always count the number of counter-
clockwise turns from the fully clockwise
position.
Note:
• The motorcycle is delivered from
the factory with the compression
damping set at 1.0 counter-
clockwise turns from the fully
clockwise position.
1
chcx
To Next Page
Loading...
