57
General Information
Brake Pads: There should be more than
0.04 in (1.0 mm) of friction material
remaining on the front brake pads and more
than 0.06 in (1.5 mm) for the rear (see
page 98).
Brake Fluid Levels: No brake fluid leakage.
Brake fluid levels must be between the MAX
and MIN marks on both reservoirs (see
page 99).
Front Forks: Smooth action. No leaks from
fork seals (see page 10 2 ).
Throttle: Throttle grip free play
0.08 - 0.12 in (2 - 3 mm) at all angles. Ensure
that the throttle grip returns to the idle
position without sticking (see page 89).
Clutch: Smooth operation and correct cable
free play (see page 92) at all sterring angles.
Coolant: No coolant leakage. Check the
coolant level in the expansion tank (when the
engine is cold) (see page 85).
Electrical Equipment: All lights and horn
function correctly (see page 44).
Engine Stop: Stop switch turns the engine
off (see page 60).
Stand: Returns to the fully up position by
spring tension. Return springs not weak or
damaged (see page 52).
To Next Page
Loading...
