SOFT TOP
17
SOFT TOP
The soft top, which is made from P.V.C. material, is supported by a
hinged frame. The assembly folds down into the back of the car and
is retained in place by a cover.
Raising the Soft Top
Unfasten and remove the hood cover. Fold the sides of the hood
fabric outwards and pull the fabric rearwards over the luggage
compartment lid. Lifting the front hoodrail, raise the assembly
sufficiently to allow the fabric to lie evenly over the frame. Secure
the fasteners (four each side, Fig. 22) to the body. Locate the front
hoodrail on the windscreen header rail and turn the levers (Fig. 21)
inwards. Knock the second hoodstick
To Next Page
Loading...
