Removing Clutch
Clutch
to
Mainshaft
Nut.
First lock fhe clutch housing to the clutch centre
by
inserting the tool illustrated in Fig.
33.
Bend back the locking washer tab and then
place a good box spanner on the nut and shock
it
loose by striking the spanner
tommy bar a few sharp blows with
a
hammer.
Unscrew the nut and remove the
plain and lock washers.
Fig.
31.
USE OF CLUTCH EXTRACTOR
"AB"
AND LOCKING TOOL "C"
To Next Page
Loading...
