Trojan Technologies Aquafine TrojanUVLogic Series

Need help?

Do you have a question about the Trojan Technologies Aquafine TrojanUVLogic Series and is the answer not in the manual?

Summary

Preface

Warnings and Precautions

Essential safety guidelines and warnings for operating the equipment safely.

General Lockout Procedures

Steps for safely de-energizing equipment before maintenance or repair.

Introduction to UV Theory

Factors Affecting UV Disinfection

Key parameters influencing UV disinfection efficiency and performance.

System Overview

System Components

Description of the main parts and their functions within the UV system.

Operations Overview

Explanation of how the UV system functions and its operational modes.

Start Up and Shut Down Procedures

Start Up UV System

Step-by-step instructions for safely starting the UV system.

UV Reactor (UVR)

UV Lamp Assembly

Details on the UV lamps, their installation, and replacement procedures.

Quartz Sleeves

Information on the quartz sleeves, their function, cleaning, and replacement.

Control Panel (CP)

Control Panel (CP) Software

Explanation of the control panel interface and software functions.

Alarm Overview

Details on system alarms, their meanings, and potential causes.

Alarms and Troubleshooting

Alarm Indicators

Identifies various alarms and their associated causes and remedies.

General Troubleshooting

Common issues and step-by-step guidance for resolving them.

Installation Instructions

Set-up

Instructions for physically installing and connecting the UV system components.

System Start-up

Procedures for the initial power-up and verification of the installed system.