12
26
26
26
26
2
22
15
3
1
20
20
22
22
22
15
25
2
22
22
15
20
4
27
27
16
21
21
19
19
5
13
1042-6
4. ASSEMBLY STEPS
STEP 01
• Attach Right Upright (3) to Cross Bar (2) with two 3/8” x
2-1/4” Bolts (15), four Washers (22) and two Nuts (20)
• Repeat procedure for Left Upright (1).
• Insert two 1-1/2” Square Caps (26) into each Upright
where shown.
• Place Weight Rod (12) through one of the selector holes
• Place one 3/4” Roundcap (25) on end of rod
STEP 02
• Attach Main Frame (4) to Cross Bar (2) with two 3/8” x
2-1/4 Bolts (15), four Washers (22) and two Nuts (27).
• Slide “stub” of Main Frame (4) down into Front Leg
Frame (5) and attach with one 3/8” x 3/4” Bolt (16).
• Insert two 1-1/4” Square Caps (27) into Front Leg
Frame (5).
•Attach Brace Bar (13) to Main Frame (4) and Front Leg
Frame (5) with Bolt (19) and Washer (21).
To Next Page
Loading...