To Next Page
A
Ana BrownJul 25, 2025
Why is the Trojan TH-35 striking too weak?
- BbcooperJul 25, 2025
A weak striking force in your Trojan Tools can stem from several causes. The engine rotation speed might be too low, requiring adjustment. The gas pressure in either the N2 Chamber or Accumulator could be insufficient, necessitating a check and recharge. Additionally, the pressure might be set incorrectly, or the overflow valve could be broken, so check and regulate it. The chisel could be damaged, requiring grinding of the damaged chisel or bushing. Finally, the hydraulic oil level might be low or the oil might be dirty; in that case, check, add, or change the oil.
General
