EasyManua.ls Logo

TrolMaster HS-1 - HS-1 Technical Specifications; Certifications and Compliance; Ingress Protection Rating; Electrical Input Requirements

Default Icon
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. SPECIFICATIONS
7. GENERAL INFORMATION
a ) Please use TrolMaster’s components for better performance.
b )In the case of defects of the Humidistat Station, the Humidistat Station will
either be replaced or repaired using new or reconditioned products or parts by
TrolMaster within three-year warranty from the original date of purchase. For
service, return the Humidistat Station in good packaging to our agent with the
original sale receipt.
c ) Non-professional DO NOT open the cabinet to prevent electric shock or
damage to the Humidistat Station.
WARNING : DO NOT allow the Humidistat Station to be exposed to water
or excessive heat. DO NOT open or attempt to repair or disassemble the
Humidistat Station, as there are no user-serviceable parts inside. Opening the
controller will void the warranty.
1 . If the surface of Humidistat Station is dirty, wipe it with a dry towel.
2 . The Control Board is designed for indoor use only, it should be operated
under natural ventilation conditions.
3 . For safety, it is necessary to connect the ground wire. If a short circuit did