■ 10
│
GB
│
IE TLGL 1000 B1
Troubleshooting
In this section you will receive important information for the localisation and
remedying of malfunctions.
Malfunction causes and remedies
The following table will help with localising and remedying minor malfunctions:
Defect Possible cause Solution
The battery
charger is not
functioning.
The power cable is not
plugged in.
Insert the power cable into a mains
power socket.
Mains power socket is not
supplying power.
Check the circuit fuse.
The inserted
batteries are not
being charged.
The batteries are not inserted
as per their polarity.
Insert the batteries as per their polarity
(see marking in the charging slot).
Match the charging contacts to the
positions of the positive and negative
terminals on your Li-ion battery.
Observe the labelling on the Li-ion
battery.
The inserted batteries are
not suitable for charging.
Insert only rechargeable Ni-Cd and
Ni-MH batteries of the types AAA/
AA/C/D and 3.6 - 3.7V Li-ion
batteries.
The temperature monitoring
was initiated.
Disconnect the plug from the mains
power socket and allow the device to
cool down.
NOTICE
► If you cannot solve the problem with the aforementioned methods, please
contact Customer Services.
Storage/Disposal
Storage
If you do not intend to use the device for a longer time, remove the batteries and
store it in a clean, dry place away from direct sunlight.
To Next Page
Loading...
Need help?
General
