Trotec BN30 - Foreseeable Misuse; Personnel Qualifications; Residual Risks; Information About the Device

EN 3
socket thermostat BN30
Foreseeable misuse
The device is not suitable for use with any type of extension
cables. The device must not be used in potentially explosive
areas, when wet or very humid.
Personnel qualifications
People who use this device must:
• have read and understood the instructions, especially the
Safety chapter.
Residual risks
Warning of electrical voltage
Electric shock due to insufficient insulation! Check the
device for damages and proper functioning before each
use.
If you detect damages, do not use the device any
longer.
Do not use the device when either the device or your
hands are damp or wet!
Do not use the device when the battery compartment
or the housing is open.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Information about the device
Device description
The thermostat BN30 enables the temperature control of
heating devices and air conditioners from 5°C to 49°C. To to
so, plug the socket thermostat in between the heating device or
air conditioner and a socket, and select the desired
temperature. Via its integrated sensors, the device measures
the current room temperature and regulates the heating device
or air conditioner according to the desired target value.
The operation and programming of the device allow for a wide
range of applications. The device is particularly suitable for
mobile heating systems.
The current room temperature can be read from the display.
The device is also power failure-proof thanks to an integrated
EEPROM.
Device depiction
1
2
3
4
5
6
7
No. Designation
1 SETbutton
2 Up button
3 Down button
4 Power button
5 Socket connection
6 Connection for the terminal device (plug adapter)
7 Display