Trotec TVM 18 S User Manual

EN 5
floor fan TVM 18 S
Assembly and start-up
Scope of delivery
• 1x Device TVM 18 S
• 4x Screw
• 1x manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Assembly
Mounting the foot
1. Assemble the foot.
2. Connect the assembled foot(3) and the pole(7).
Connecting the fan and foot
1. Connect the assembled foot with the fan.
2. Screw both parts together using the four supplied screws.
Setting the fan's inclination angle
The inclination angle of the fan can be manually adjusted by up
to 110°.
1. Move the fan head forward or back so that it is slightly
inclined either to the front or to the rear.
ð The fan's inclination angle has been set and the air will
flow out at the selected inclination angle.
110°

Trotec TVM 18 S Specifications

General

Brand	Trotec
Model	TVM 18 S
Category	Fan
Language	English