Trotec TVM 18 S User Manual

6 EN
floor fan TVM 18 S
Adjusting the height
1. Turn the height adjustment screw(2) to be able to set the
appropriate total height.
107 - 135 cm
Start-up
When positioning the device, observe the minimum distance
from walls or other objects as described in the chapter
Technical annex.
Positioning
A
C
C
D
B
Warning
Risk of injury due to incorrect start-up!
There is a risk of injury if the protective grid is not
installed correctly around the impeller. The protective
grid must be installed correctly before the device is
switched on.
Warning
Risk of injury if protective grid is removed!
There is a risk of injury if the protective grid is removed
during operation. Do not remove the protective grid
while the device is in operation!
• Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
• Set the device up in an upright and stable position.
• Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
• Make sure that extension cables are completely unrolled.
• Make sure that no curtains or other objects interfere with
the air flow.
Connecting the power cable
• Insert the mains plug into a properly fused mains socket.
Operation
Operating elements
8
9
No. Designation Meaning
8 Fan stage buttons
1
2
3
Setting the fan speed:
Stage 1 = low
Stage 2 = medium
Stage 3 = high
9
0 button
Switching the device off

Trotec TVM 18 S Specifications

General

Brand	Trotec
Model	TVM 18 S
Category	Fan
Language	English