Troubleshooting & Error detection
TRAX-MID
Notice
1.
Check that connector and throttle cable are not
damaged and correctly connected.
2.
Disconnect and reconnect the throttle, if still
no function please change the throttle.
Check the connector from the throttle is correctly
connected. If this does not solve the problem,
please change the throttle.
1.
Remove and re-insert the battery to see
if it solves the problem.
2.
Using the Bafang BESST tool update the
controller.
3.
Change the battery to resolve the problem.
1.
Check all connectors from the motor are
correctly connected.
2.
If the problem still occurs, please change
the motor.
To Next Page