To Next PageTo Next Page
Need help?Do you have a question about the Troy-Bilt 020245-1 and is the answer not in the manual?
General| Engine Brand | Honda |
|---|---|
| Pump Type | Axial Cam |
| Hose Length (ft) | 25 |
| Pressure | 2500 PSI |
| Flow Rate | 2.3 GPM |
| Pump | Axial Cam |
| Wheel Size | 10 inches |
| Flow Rate (GPM) | 2.3 GPM |
| Nozzles Included | 0°, 40°, Soap |
| Rated Pressure (PSI) | 2500 PSI |
Explains the safety alert symbol and its use with signal words to warn of hazards.
Warns about carbon monoxide from running engines, its dangers, and proper ventilation.
Advises on preventing falls due to slippery surfaces created by pressure washer use.
Provides safety guidelines for handling fuel, operating, transporting, and storing the equipment.
Warns about the risk of electrocution from contact with electrical wiring.
Details the danger of starter cord kickback and how to avoid it.
Warns about hot engine surfaces and exhaust gases, and clearance requirements.
Explains the danger of high-pressure water streams piercing skin and causing amputation.
Provides precautions for safe use of the spray gun and accessories.
Outlines the steps required to prepare the pressure washer for operation before first use.
Provides instructions for attaching the handle and accessory tray to the main unit.
Guides on adding the correct engine oil and fuel to the pressure washer before operation.
Instructions for connecting the high pressure hose and garden hose to the pressure washer.
Step-by-step instructions for starting the pressure washer for the first time or after a period of inactivity.
Instructions on how to properly shut down the pressure washer, including engine idle and pressure release.
Provides a table of common problems, their causes, and recommended corrections.
