Need help?Do you have a question about the Troy-Bilt 12060 and is the answer not in the manual?
Guidelines for safe tiller operation, avoiding hazards, and emergency stops.
Instructions for unpacking the tiller and verifying all parts are present and undamaged.
Detailed steps for attaching the handlebars to the tiller frame.
Instructions for filling the engine crankcase with the correct type and amount of oil.
How to engage and disengage the wheels/tines using the forward clutch bail.
Controls the tine penetration depth; includes travel position.
Overview of the engine controls, including throttle and choke.
How to use the throttle lever to control engine speed and stop the engine.
How to use the choke lever for easier engine starting.
Steps for starting the engine using the recoil starter rope.
Essential checks to perform before starting the tiller's engine.
Step-by-step guide to starting the tiller's engine safely.
Procedure for safely stopping the tiller's engine.
Instructions on how to perform tilling operations, including depth settings.
Recommendations for setting tilling depths to avoid tiller control issues.
Identification of lubrication points on the tiller for regular maintenance.
Procedure for checking and adding engine oil to maintain proper levels.
Instructions for draining and refilling the engine oil at recommended intervals.
Procedures for checking, adding, and changing the transmission gear oil.
Instructions for cleaning or replacing the air filter element.
How to check, clean, gap, or replace the spark plug for optimal performance.
Guidelines for safe tiller operation, avoiding hazards, and emergency stops.
Instructions for unpacking the tiller and verifying all parts are present and undamaged.
Detailed steps for attaching the handlebars to the tiller frame.
Instructions for filling the engine crankcase with the correct type and amount of oil.
How to engage and disengage the wheels/tines using the forward clutch bail.
Controls the tine penetration depth; includes travel position.
Overview of the engine controls, including throttle and choke.
How to use the throttle lever to control engine speed and stop the engine.
How to use the choke lever for easier engine starting.
Steps for starting the engine using the recoil starter rope.
Essential checks to perform before starting the tiller's engine.
Step-by-step guide to starting the tiller's engine safely.
Procedure for safely stopping the tiller's engine.
Instructions on how to perform tilling operations, including depth settings.
Recommendations for setting tilling depths to avoid tiller control issues.
Identification of lubrication points on the tiller for regular maintenance.
Procedure for checking and adding engine oil to maintain proper levels.
Instructions for draining and refilling the engine oil at recommended intervals.
Procedures for checking, adding, and changing the transmission gear oil.
Instructions for cleaning or replacing the air filter element.
How to check, clean, gap, or replace the spark plug for optimal performance.
General| Engine Type | 4-Cycle OHV |
|---|---|
| Engine | Briggs & Stratton |
| Engine Displacement | 208cc |
| Tilling Width | 16 inches |
| Forward Speeds | 1 |
| Reverse Speeds | 1 |
| Tine Rotation | Forward-rotating |
| Warranty | 2 years limited |
| Transmission | Chain Drive |
To Next Page
