Need help?Do you have a question about the Troy-Bilt 12087 and is the answer not in the manual?
Introductory message to the owner of the tiller, covering initial setup and operation.
Explanation of the safety alert symbol and specific warnings for California emissions.
Information regarding returning the owner registration card for warranty coverage.
Covers essential safety precautions for operating the tiller.
Step-by-step instructions for assembling the tiller.
Identifies and explains the tiller's major controls and features.
Detailed guide on how to operate the tiller safely and effectively.
Instructions for routine maintenance and repair of the tiller.
Guidance for diagnosing and resolving common tiller problems.
List and description of available attachments for the tiller.
Technical specifications and dimensions of the tiller.
Details of the tiller's comprehensive warranty coverage.
Information on obtaining engine service and replacement parts.
Crucial safety guidelines to follow before operating the equipment.
Specific warnings regarding California emissions and general operator safety.
Essential training and familiarization steps before operating the tiller.
Checks and services required before starting the engine.
Safety rules to follow during the operation of the tiller.
Safety warnings related to the tiller's battery and electrical system.
Guidance for emergency stops and safe operation on slopes.
Information on locating, maintaining, and cleaning safety decals.
Important instructions for correctly assembling the tiller.
Steps for inspecting delivery and checking all parts.
Detailed steps for securely attaching the tiller handlebars.
Instructions for safely removing the tiller from its shipping platform.
Procedure for connecting the safety system wire harness.
Steps to connect the primary drive and gear control lever.
Guide to checking the transmission and tine attachment gear oil levels.
Instructions for adding the correct type and amount of engine oil.
Procedure for mounting the engine throttle lever to the handlebar.
Instructions for setting the correct tire air pressure.
Steps for activating and charging the electric start battery.
Detailed steps for activating the tiller's battery.
Instructions on how to properly charge the tiller battery.
Various battery charging methods and associated safety precautions.
Procedure for connecting the wire harness to the keyswitch receptacle.
Instructions for correctly positioning and securing the activated battery.
Guide for connecting the battery cables to the terminals.
Introduction to tiller controls and their functions before operation.
Identification of major tiller controls with diagrams.
Explanation of the Wheels/Tines/PTO Drive Lever functions.
Checking clutch roller position for proper gear engagement.
Understanding the purpose and operation of forward interlock levers.
Guide to selecting wheel speeds using the speed lever.
How to engage and disengage the tines and PTO clutch.
Explanation of the depth regulator lever's role in tilling.
Instructions for adjusting the handlebar height.
Identification of engine controls like throttle and choke.
Operation of engine throttle, choke, and recoil starter.
Information on keyswitch starter, fuel shut-off valve, and on/off switch.
Introduction to operating the tiller and essential techniques.
General guidance on operating the tiller for various tasks.
Critical safety precautions for handling gasoline and refueling.
Procedure to test the tiller's forward interlock safety system.
Steps to safely stop the tiller's engine.
Method for starting electric start models using the recoil rope.
Recommendations for operating the tiller in cold weather.
Detailed steps for operating the tiller in the garden.
Step-by-step guide to starting the tilling process.
Techniques for easily turning the tiller in tight spaces.
Emergency and standard procedures for stopping the engine.
Methods for moving the tiller around your property.
Safe procedures for loading and unloading the tiller using ramps.
Instructions for changing the tiller's belt speed ranges.
Guidance on selecting optimal wheel and tine speeds for tasks.
Chart for selecting wheel speed and belt range combinations.
Tips for effective tilling in garden areas.
Recommendations for setting tilling depth for best results.
Steps for preparing a quality seedbed.
Techniques to avoid footprints and prevent soil erosion.
Tips for effective cultivating between rows.
Using the tiller for power composting of organic matter.
Special technique for tilling standing cornstalks into soil.
How to clear tangled vegetation from tiller tines.
Guidelines for safely tilling on moderate slopes.
Methods for creating terraces on sloped gardens.
Advice for tilling across slopes without terraces.
Technique for creating raised beds for planting.
Guidance on implementing wide-row planting methods.
Overview and operation of the PTO power unit.
Instructions for removing and attaching the tine assembly.
Detailed steps for detaching the tine attachment.
Detailed steps for reattaching the tine attachment.
Operating instructions specific to the PTO power unit.
Instructions for operating attachments pulled behind the unit.
Instructions for operating stationary PTO-driven attachments.
Procedure for safely stopping the PTO power unit engine.
Procedure for checking and tightening all bolts and nuts.
Maintenance procedures for transmission gear oil.
How to inspect for and address gear oil leaks.
Step-by-step guide for checking power unit transmission oil.
Guide for checking tine attachment transmission oil level.
Instructions for adding gear oil to the power unit transmission.
Procedure for draining and refilling the power unit transmission.
Instructions for adding gear oil to the tine attachment transmission.
Guide to measuring and adjusting drive belt tension.
Detailed steps for adjusting the drive belt tension.
Instructions for removing and installing a new drive belt.
Procedure for inspecting the reverse drive disc for wear.
Steps to check and adjust the reverse drive system components.
Procedure for adjusting the reverse drive system.
How to check tiller tines for wear and damage.
Instructions for replacing individual tiller tines.
Guide for removing and replacing tine holder assemblies.
Procedures for tire and wheel maintenance.
Steps for removing the tiller wheels.
Guide for changing and checking engine oil.
Instructions for maintaining the engine throttle cable.
Procedure for inspecting and maintaining the spark plug.
Guidelines for maintaining the battery during normal operation.
Recommendations for storing the tiller's battery during off-season.
Steps for safely removing and reinstalling the tiller battery.
Procedure for inspecting the forward interlock wiring system.
Diagnosing issues with the forward interlock safety system.
Troubleshooting common problems with the drive lever.
Diagnosing problems with the wheel speed lever.
Troubleshooting when wheels and tines fail to rotate.
Diagnosing why wheels turn but tines do not.
Troubleshooting tiller hesitation in soil.
Resolving issues with a stiff depth regulator lever.
Addressing tiller pull to one side due to wheel misalignment.
Troubleshooting causes for the tiller pulling to one side.
Addressing problems with tine holder bolts loosening or breaking.
Solutions for improving tiller traction.
Troubleshooting gear oil leaks from transmissions.
Diagnosing and resolving issues with low engine power.
Common reasons and solutions for a hard-to-start engine.
Troubleshooting steps when the engine fails to start.
Diagnosing why the engine shuts off during forward movement.
Causes and solutions for engine overheating.
Troubleshooting an engine that runs erratically.
Addressing engine performance issues under load.
Diagnosing problems with the electric start key switch.
Description and uses of the Hiller-Furrower attachment.
Information on the Row Marker attachment for straight rows.
Details on using wheel weights for increased traction.
Description of the bumper guard for engine protection.
Information on the Dozer/Snow Blade attachment.
Details on optional hardened-face tines for durability.
Information on tire chains for added traction.
Description of the tow hitch attachment.
Information on the PTO Chipper/Shredder attachment.
Listing of additional available TROY-BILT attachments.
Specifications for tiller height with and without handlebars.
Specifications for tiller length with and without handlebars.
Specifications for tiller width.
Approximate weights of tiller models.
Details on the tiller's transmission system and oil.
Table of wheel and tine speeds at various settings.
Instructions for obtaining warranty service or repairs.
Information on specific legal rights granted by the warranty.
Details of the 30-day satisfaction guarantee and return policy.
To Next Page
General