Troy-Bilt 1923 User Manual

Owner’s Manual / Manual del Propietario
Portable Generator / Generador Portátil
Model / Modelo 01923
Manual No. 192411GS Revision 1 (02/05/2003)Printed in USA
Questions? Preguntas?
Helpline - 1-888-611-6708 M-F 8-5 CT
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC
JEFFERSON, WISCONSIN, U.S.A.
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
IMPORTANTE: LEYO LA SEGURIDAD LAS ORDENES Y LAS INSTRUCCIONES DETENIDAMENTE
Troy-Bilt® is a registered trademark of MTD and is used under license to Briggs & Stratton Power Products.
Troy-Bilt® es una marca registrada registrada de MTD y se usa abajo licencia a Briggs & Stratton Power Products.

Troy-Bilt 1923 Specifications

General

Brand	Troy-Bilt
Model	1923
Category	Portable Generator
Language	English

Summary

Section 1: Safety Rules

Safety Alert Symbol Usage

Explains the purpose and use of the safety alert symbol for hazards.

California Spark Arrester Requirement

Details California law regarding spark arresters for mufflers.

California Emissions Warning

Warns about chemicals in engine exhaust known to cause cancer in California.

Section 2: Features and Controls

Generator Component Identification

Identifies and describes the main parts, controls, and features of the generator.

Electrical Output Ports Description

Details the 120V AC and 12V DC output receptacles and their specifications.

Safety and Identification Features

Covers grounding lug, circuit breaker, and data tag for safety and information.

Section 3: Assembly

Carton Contents Check

Lists items included in the generator packaging and instructions for missing parts.

Adding Engine Oil

Provides detailed instructions and recommendations for adding engine oil.

Adding Fuel

Gives safety warnings and steps for adding unleaded fuel to the tank.

Section 4: Operation

Grounding the Generator

Explains the importance and method of grounding the generator for safety.

Starting the Generator Engine

Outlines the step-by-step procedure for starting the generator's engine.

Section 4: Operation

Operational Procedures and Systems

Covers connecting loads, stopping the engine, oil alert system, and battery charging.

Section 4: Operation

120 Volt AC Receptacle Usage

Explains the use and limitations of the 120V AC outlets.

12 Volt DC Accessory Jack Use

Details how to use the 12V DC jack for charging or powering devices.

Extension Cord Guidelines

Provides recommendations for selecting and using extension cords with the generator.

Section 4: Operation

Generator Capacity and Load Calculation

Explains how to calculate and manage generator power capacity for multiple loads.

Power Management Strategy

Advises on sequential load management to protect the generator and devices.

Section 5: Maintenance

Product Specifications Overview

Lists key technical specifications for the generator and engine.

General Maintenance Recommendations

Emphasizes owner responsibility for maintenance to ensure warranty coverage.

Generator Cleaning and Care

Provides instructions on cleaning the generator's exterior and air slots.

Maintenance Schedule Chart

Details recommended maintenance tasks and their frequency.

Section 5: Maintenance

Engine Maintenance Procedures

Covers checking oil, changing oil, spark plug service, and air filter maintenance.

Section 5 & 6: Maintenance & Storage

Air Filter Element Cleaning/Replacement

Guides on how to clean or replace the air filter element.

Spark Arrester Screen Maintenance

Explains how to inspect and clean the spark arrester screen.

Data Tag Information

Highlights the importance of the data tag for service and reference.

Transporting and Storing the Generator

Provides initial instructions for transporting and storing the unit.

Section 6: Storage

Storage Preparation and Guidelines

Covers long-term storage, fuel system prep, engine lubrication, and general storage tips.

Section 7: Troubleshooting

Troubleshooting Common Engine Issues

Addresses problems like no output, bogging down, starting issues, shutdown, and power loss.

Section 8: Wiring Diagram

Generator Wiring Schematic

Presents a detailed schematic of the generator's electrical connections.

Section 9: Exploded Views and Parts Lists

Main Unit Parts List

Lists all parts for the main generator unit with part numbers.

Engine Cylinder Block and Head Parts

Details parts for the engine's cylinder block and head assembly.

Engine Crankcase, Crankshaft, Camshaft Parts

Lists components for the engine's crankcase, crankshaft, and camshaft.

Engine Piston, Rod, Magneto, Air Cleaner Parts

Details parts for the engine's piston, rod, magneto, and air cleaner.

Engine Carburetor and Control Linkages Parts

Lists parts for the engine's carburetor and control linkages.

Engine Fan Cover, Recoil Starter, Oil Sensor Parts

Details parts for the engine's fan cover, recoil starter, and oil sensor.

Engine Lead Wires, Muffler, Gasket Set Parts

Lists components for engine lead wires, muffler, and gasket sets.

Emission Control System Warranty

Owner's Warranty Responsibilities

Outlines the owner's responsibilities regarding warranty maintenance.

Emission Control Warranty Coverage

Specifies what parts are covered under the emission control system warranty.

Warranty Claims and Exclusions

Details the process for filing claims and common exclusions.

Limited Warranty Policy

Briggs & Stratton Warranty Terms

Explains the terms and conditions of the limited warranty for the equipment.

Warranty Period and Use Types

Differentiates warranty coverage for consumer vs. commercial use.

Warranty Exclusions and Limitations

Lists conditions and parts not covered by the warranty.