To Next PageTo Next Page
Need help?Do you have a question about the Troy-Bilt 30248 and is the answer not in the manual?
General| Brand | Troy-Bilt |
|---|---|
| Model | 30248 |
| Category | Portable Generator |
| Language | English |
Explains the use of safety alert symbols and signal words for hazard communication.
Warns about the dangers of carbon monoxide gas produced by the generator.
Highlights the risk of electrocution from generator backfeed and improper handling.
Explains the risk of injury from rapid starter cord retraction (kickback).
Warns about the flammability and explosiveness of fuel and its vapors.
Warns about unintentional sparking causing fire or electric shock during repairs.
Alerts to burns from hot surfaces and ignition risk from exhaust heat/gases.
Warns that exceeding wattage capacity can damage the generator and connected devices.
Instructs on placing the generator on a level surface and checking engine oil before starting.
Warns that starting without proper oil will cause equipment failure and void warranty.
Provides instructions and safety precautions for adding fuel to the generator.
Warns about the flammability and explosiveness of fuel and its vapors.
Emphasizes that connecting to a building's system must be done by a qualified electrician.
Warns about the danger to utility workers from backfeed if not isolated properly.
Details safe generator placement, ventilation, and minimum clearance requirements.
Reiterates the danger of CO gas and the need for outdoor operation.
Covers hazards like hot surfaces, exhaust gas, and kickback during engine start and operation.
Reiterates CO hazard and outdoor operation requirement, especially with shelters.
Explains how to select items and calculate wattage needs to avoid overloading.
