Need help?Do you have a question about the Troy-Bilt 400 Series and is the answer not in the manual?
General| Engine Type | 4-Cycle |
|---|---|
| Engine | Briggs & Stratton |
| Engine Displacement | 163 cc |
| Deck Material | Steel |
| Weight | 80 lbs |
| Mulching Capability | Yes |
| Self-Propelled | Yes |
| Cutting Width | 21 inches |
| Cutting Height | 1.25 - 3.75 in |
| Fuel Tank Capacity | 0.5 gallons |
Read manual, understand controls, and follow all instructions before operation.
Keep children away from mowing area and away from hot engines.
Handle gasoline with extreme care due to flammability and explosive vapors.
Perform maintenance and cleaning safely, disconnect spark plug wire.
Restrict use to trained individuals who understand manual and machine.
Service engine with gasoline and oil as instructed in the separate engine manual.
Connect spark plug wire, prime if needed, and pull starter rope.
Release the blade control handle to stop the engine and blade.
How to use the mulching blade for fine clippings and lawn fertilization.
Adjust wheel height for nine different cutting positions.
Minor adjustments may be needed for fuel, temp, altitude, and load.
Lubricate wheels and blade control handle pivot points.
Sharpen or replace blade, ensure it is balanced and properly mounted.
Clean the underside of the mower deck after each use to prevent buildup.
Refer to engine manual for maintenance and oil instructions.
To Next Page