SECTION8: STORINGYOURLAWNMOWER
The following steps should be taken to prepare your
lawn mower for storage.
WARNING: Be sure to disconnect the spark
plug wire and De-energize starter before
performing any repairs or maintenance. DO
NOT attempt any maintenance or service to
the engine and or mower equipped with the
safety key in the unlocked and or energized
mode.
WARNING: NEVER assume starter is de-
energized, even if the key is in the locked
position and or removed from the engine.
ALWAYS de-energize starter prior to
performing any maintenance or service to
the engine and or mower. Follow instructions
on the engine and or machine to de-energize
starter.
Clean and lubricate mower thoroughly as described
in the lubrication instructions.
IMPORTANT:We do not recommend the use of a
pressure washer or garden hose to clean your unit.
Refer to engine manual for correct engine storage
instructions.
Coat mower's cutting blade with chassis grease to
prevent rusting.
Store mower in a dry, clean area. Do not store next
to corrosive materials, such as fertilizer.
NOTE: When storing any type of power equipment in a
poorly ventilated or metal storage shed, care should be
taken to rust-proof the equipment. Using a light oil or
silicone, coat the equipment, especially cables and all
moving parts.
18
To Next Page
Loading...
