Need help?Do you have a question about the Troy-Bilt AST TB75SS and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 25 cc |
| Attachment Capable | Yes |
| Cutting System | Dual Line |
| Shaft Type | Straight |
| Handle Type | Loop Handle |
| Cutting Width | 17 in. |
| Line Diameter | 0.095 in. |
| Starting System | SpringAssist |
Provides information on obtaining service, authorized dealers, and warranty service requirements for the unit.
Details product information, illustrations, and specifications for accuracy, noting the right to make changes.
Important note for users on US Forest Land and specific states regarding spark arrestors and fire prevention.
Warning about engine exhaust chemicals known to cause cancer or reproductive harm in the state of California.
Explains the use of safety alert symbols to indicate potential dangers and require attention to avoid injury.
Defines the meaning and implications of DANGER, WARNING, and CAUTION safety symbols for user awareness.
Provides critical instructions for safe operation to prevent injury to operators and bystanders.
Details specific safety precautions for gasoline-powered units, focusing on flammability and vapor explosion risks.
Covers safe practices during unit operation, including personal protective gear, handling, and environmental awareness.
Provides additional safety advice covering unit storage, transport, cleaning, and general care to prevent hazards.
Explains various safety symbols and pictographs found on the product and within the operator's manual.
Stresses the importance of wearing appropriate eye and hearing protection to prevent severe injury during operation.
Advises maintaining a safe distance for children, pets, and bystanders from the operating area to prevent injury.
Describes the primary uses of the trimmer, such as cutting grass, weeds, edging, and decorative trimming.
Guides on correctly attaching and positioning the D-handle for optimal user grip and control during operation.
Instructions for correctly fitting the cutting attachment shield to the unit for essential safety.
Essential guidance on properly mixing 2-cycle oil and unleaded gasoline for engine operation.
Provides precautions and recommendations when using blended fuels, emphasizing fresh fuel and proper agitation.
Recommends using fuel additives for corrosion inhibition and minimizing gum deposit formation.
Step-by-step guide on how to safely start the trimmer engine, including EZ-Start technology.
Details the correct procedure for safely shutting down the trimmer engine.
Explains how to attach, remove, and use optional EZ-Link system accessories with the trimmer.
Provides safety precautions and steps for safely detaching cutting attachments or accessories from the unit.
Guides on securely attaching cutting attachments or optional accessories to the trimmer unit.
Describes the correct posture and grip for operating the trimmer safely and effectively.
Explains how to release and maintain optimal trimming line length using the bump head mechanism.
Offers techniques and advice for efficient and effective grass trimming, edging, and line wear.
Details the method for performing decorative trimming around objects like trees, posts, and fences.
Outlines the required maintenance procedures and their frequencies for optimal engine performance.
Instructions on how to install or replace trimming line in the SpeedSpool system.
Step-by-step guide for winding new trimming line onto the inner reel of the SpeedSpool.
Instructions for replacing the trimmer line using a pre-wound SpeedSpool reel.
Describes how to correctly release trimming line if it does not advance automatically.
Details procedures for cleaning the SpeedSpool to ensure proper operation and prevent jams.
Lists part numbers for SpeedSpool replacement components like line, reels, and knobs.
Instructions for safely removing the air filter and muffler cover for maintenance.
Guides on cleaning and re-oiling the air filter to maintain engine performance and warranty.
Steps for correctly reattaching the air filter/muffler cover after maintenance.
Advises checking fuel mixture as a common solution for performance issues before adjustment.
Highlights the importance of a clean air filter for correct air/fuel mixture and engine operation.
Details how to adjust the idle speed screw for smooth engine idling.
Provides instructions for preparing the unit for extended periods of storage, including draining fuel.
Outlines safety precautions and steps for safely transporting the trimmer.
Lists available replacement parts and accessories for the unit, referring to the parts list.
Lists potential causes and actions for when the engine fails to start.
Provides solutions for issues related to the engine not idling properly.
Offers causes and remedies for problems with engine acceleration.
Addresses common causes and solutions for loss of power or stalling during use.
Lists detailed technical specifications for the engine, including type, displacement, and RPM.
Provides technical details for the drive shaft, cutting mechanism, and dimensions.
Explains the owner's responsibilities and rights regarding the emission control warranty.
Details the owner's duties for maintaining the unit to ensure warranty coverage.
Outlines the terms and duration of the manufacturer's warranty for emission control systems.
Lists and illustrates engine components specific to the TB75SS model.
Lists and illustrates boom and trimmer components for the TB75SS model.
Lists and illustrates engine components specific to the TB25CS model.
Lists and illustrates boom and trimmer components for the TB25CS model.
Provides information on where and how to get warranty service and locate authorized dealers.
Lists conditions and situations not covered by the limited warranty, such as misuse or neglect.
Notes the manufacturer's right to modify product designs without assuming obligation for prior models.
To Next Page
