Need help?Do you have a question about the Troy-Bilt TB70SS and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 25 cc |
| Cutting Width | 17 inches |
| Line Diameter | 0.095 inches |
| Cutting System | Dual-Line |
| Shaft Type | Straight |
| Start System | Spring Assist |
Explains the purpose and meaning of various safety symbols used in the manual to alert users to hazards.
Crucial instructions to follow before operating the unit for operator and bystander safety.
Critical warnings about gasoline flammability, explosion risks, and proper fueling precautions.
Detailed safety precautions for handling and mixing gasoline and oil to prevent fires and explosions.
Guidelines and precautions to ensure safe operation of the trimmer, including body protection and area awareness.
Warns about severe injury from thrown objects and the rotating cutting attachment, emphasizing shield use.
Important safety advice covering storage, cleaning, and general precautions to prevent accidents.
Instructs to keep bystanders, children, and pets at a safe distance from the operating area.
Detailed instructions on the proper fuel-to-oil ratio (40:1) for 2-cycle engines to ensure correct operation.
Step-by-step guide on how to start the trimmer engine using the primer bulb and Spring Assist lever.
Simple instructions on how to safely stop the trimmer's engine by moving the control to the OFF position.
Describes the correct posture and grip for operating the trimmer safely and effectively.
Outlines the required maintenance procedures and their frequencies for optimal engine performance.
Guide for cleaning and inspecting the spark arrestor screen and assembly to ensure proper function.
Detailed steps for removing, checking, and replacing the spark plug with correct air gap.
Covers removing, cleaning, and re-oiling the air filter for optimal engine performance.
Lists common causes and actions for engine starting problems, such as fuel issues or starter engagement.
Identifies causes and solutions for the engine not idling properly, often related to air filter or fuel mixture.
Addresses causes and actions for the engine failing to accelerate, including fuel, carburetor, or binding issues.
Explains why the engine might lose power or stall during cutting, pointing to fuel, spark, or binding.
To Next Page
