Troy-Bilt Bronco CRT Operator's Manual

Troubleshooting
Problem Cause ! Remedy
Tines turn, but wheels don't
Poor tilling performance
1. Wheel Drive Pins notin WHEEL DRIVE.
2. Bolt loose in transmission pulley.
3. Internal transmission wear or damage.
1. Worn tines.
2. Improper Depth Regulator setting.
3. Forward Drive Belt slipping.
1. Inserts Drive Pins properly.
2. Tighten bolt.
3. Contact local authorized dealer.
1. Replace Tines.
2. See "Tilling Tips &Techniques."
3. See Maintenance & Adjustments Section.
19

Troy-Bilt Bronco CRT Specifications

General

Number of Forward Speeds	1
Number of Reverse Speeds	1
Tilling Width	18 in.
Tilling Depth	8 inches
Warranty	2 years limited
Starting System	Recoil start