Troy-Bilt LS 27 TB User Manual

MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
04/25/2007
FORM NO. 769-00088F
LS 27 TB — Log Splitter
Safety • Assembly • Operation • Adjustments • Maintenance • Troubleshooting • Parts Lists • Warranty
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).
If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law
(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester
for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland,
Ohio 44136-0019.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
PRINTED IN U.S.A
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION
IMPORTANT
OPERATOR’S MANUAL

Troy-Bilt LS 27 TB Specifications

General

Brand	Troy-Bilt
Model	LS 27 TB
Category	Log Splitter
Language	English

Summary

Log Splitter Operator's Manual Introduction

Important Safety Instructions

Crucial safety warnings before operation.

Log Splitter Model and Support Information

Finding and Recording Model Number

Instructions for locating and recording equipment model and serial numbers.

Customer Support Information

Details on how to contact customer support for assistance.

Log Splitter Safety Labels and Operation Guidance

Safety Labels Overview

Explanation and location of critical safety labels on the log splitter.

Operator's Instructions for Use

Step-by-step instructions for safe operation.

Log Splitter Safe Operation Practices: General and Preparation

General Safety Practices

Broad safety rules for operating the log splitter.

Pre-Operation Preparation

Essential checks and preparations before starting the machine.

Log Splitter Safe Operation Practices: Operation and Maintenance

Operating the Log Splitter

Guidelines and procedures for the actual splitting operation.

Maintenance and Storage Guidelines

Procedures for routine maintenance and long-term storage.

Log Splitter Setup: Assembly Procedures

Assembling Key Components

Instructions for attaching the tongue, jack stand, and cylinder.

Log Splitter Setup: Preparing for Use

Preparing the Log Splitter for Use

Steps for lubricating, checking fluid, and bleeding the system.

Log Splitter Component Identification

Identifying Key Components

Overview of major parts like beam locks and engine controls.

Log Splitter Operation: Starting and Fueling

Control Handle and Starting Engine

How to use the control handle and start the engine safely.

Fuel and Oil Procedures

Instructions for filling gasoline and engine oil.

Log Splitter Operation: Usage and Tips

Pre-Use Checks and Splitting Procedure

Steps before each use and the core splitting process.

Operating Tips for Efficiency

Best practices for optimal log splitting.

Log Splitter Operation: Adjustments and Transport

Beam Adjustment and Transport

How to position the beam and prepare for transport.

Log Splitter Maintenance: Adjustments and Warranty

Adjusting Wedge and Gibs

Procedures for adjusting wedge assembly and gibs for wear.

Warranty Void Conditions

Important conditions that may void the product warranty.

Log Splitter Maintenance: Fluid, Filters, and Hoses

Hydraulic System Maintenance

Procedures for hydraulic fluid, filter, and hoses.

Engine and Coupler Maintenance

Engine references and flexible pump coupler care.

Log Splitter Maintenance: Couplers and Tires

Pump Coupler Replacement and Tire Care

Steps for replacing the pump coupler and tire pressure recommendations.

Log Splitter Storage Instructions

Proper Storage Procedures

Instructions for preparing and storing the log splitter for extended periods.

Log Splitter Troubleshooting: Engine Problems

Engine Fails to Start

Common causes and remedies for engine starting problems.

Engine Runs Erratic or Overheats

Troubleshooting steps for engine performance issues.

Log Splitter Troubleshooting: Hydraulic System

Cylinder and Splitting Performance

Diagnosing issues with cylinder movement and splitting effectiveness.

Engine Stalling and Leaks

Solutions for engine stalling and pump shaft seal leaks.

Log Splitter Parts Diagram

Log Splitter Parts List

Log Splitter Manufacturer's Limited Warranty