W
William ChaneyJul 26, 2025
Why Troy-Bilt TB10CS Trimmer engine will not start?
- RrobertmendozaJul 26, 2025
Several factors can prevent your Troy-Bilt Trimmer engine from starting. It could be due to an empty fuel tank, which requires filling with properly mixed fuel. Other potential causes include an insufficient number of presses of the primer bulb, an engine that is flooded, old or improperly mixed fuel, a fouled spark plug, a plugged spark arrestor, or the blue EZ-Start™ lever not being in the correct position. Also, very low or high outside temperatures may require specific starting procedures, such as pulling the starter rope multiple times when it's below 40º F or squeezing the throttle when it's above 90º F.