Troy-Bilt TB15CS - SPECIFICATIONS; ENGINE*; DRIVE SHAFT and CUTTING ATTACHMENT*

18
SPECIFICATIONS
*All specifications are based on the latest product information available at the time of printing. We reserve the right to
make changes at any time without notice.
ENGINE*
DRIVE SHAFT and CUTTING ATTACHMENT*
Engine Type.......................................................................................................................................... Air-Cooled, 2-Cycle
Stroke................................................................................................................................................... 1.25 in. (31.75 mm.)
Clutch Type ......................................................................................................................................................... Centrifugal
Displacement............................................................................................................................................ 1.9 cu in. (31 cc.)
Operating RPM.................................................................................................................................................. 7,200
+ rpm
Idle Speed RPM ...................................................................................................................................... 2,800 - 4,000 rpm
Ignition Type.......................................................................................................................................................... Electronic
Ignition Switch................................................................................................................................................... Slide Switch
Spark Plug Gap...................................................................................................................................... 0.020 in. (0.5 mm.)
Lubrication................................................................................................................................................... Fuel/Oil Mixture
Fuel/Oil Ratio................................................................................................................................................................. 40:1
Carburetor....................................................................................................................................... Diaphragm, All-Position
Starter............................................................................................................................................................... Auto Rewind
Muffler..................................................................................................................................................... Baffled with Guard
Throttle............................................................................................................................................... Manual Spring Return
Fuel Tank Capacity................................................................................................................................... 12 fl.oz. (355 ml.)
Drive Shaft Housing ......................................................................................................................... Steel Tube (EZ-Link™)
Throttle Control ........................................................................................................................................ Finger-Tip Trigger
Approximate Unit Weight (No fuel, with cutting attachment, shield and D-handle)....................................... 11 lbs. (5 kg.)
Cutting Mechanism.........................................................................................................................................Bump Head™
Shoulder Strap ........................................................................................................................................................ Optional
Line Spool Diameter.................................................................................................................................... 3 in. (76.2 mm.)
Trimming Line Diameter....................................................................................................................... 0.080 in. (2.03 mm.)
Cutting Path Diameter.............................................................................................................................. 17 in. (43.18 cm.)