8 Section 2 — important Safe operation practiceS
Symbol Description
WARNING — DO NOT STAND
Stepping on the transmission cover may deform it and damage the transmission fan.
This can cause the transmission to overheat. Other transmission parts can also be
damaged.
DANGER— GUARDS, SHEILDS, SWITCHES, ETC.
Keep safety devices (Guards, Sheilds, Switches, Etc.) in place and working.
WARNING— MACHINE IS HOT
Allow the engine to cool at least two minutes before refueling or storing.
max10"
WARNING— THIS EQUIPMENT MAY CREATE SPARKS
Operation of this equipment may create sparks that can start fires around dry
vegetation. Do not drive through piles of dry leaves or tall dry grass (Max. 10”). Keep
the machine free of debris.
WARNING— HOT SURFACE
Engine parts, especially the muffler, become extremely hot during operation. Allow
engine and muffler to cool before touching.
DANGER — ROTATING BLADES
To reduce the risk of injury, keep hands and feet away. Do not operate unless
discharge cover or grass catcher is in its proper place. If damaged, replace
immediately.
WARNING— THIS EQUIPMENT MAY CREATE SPARKS
Operation Of This Equipment May Create Sparks That Can Start Fires Around Dry
Vegetation. A Spark Arrestor May Be Required. The Operator Should Contact Local
Fire Agencies For Laws Or Regulations Relating To Fire Prevention Requirements.
WARNING— CARBON MONOXIDE
Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains
carbon monoxide, an odorless and deadly gas.
DANGER— ROTATING BLADES
Do not step on the cutting deck.
To Next Page
Loading...
Need help?
General
