Tru-Test EC-09 User Manual

Tru-Test EC-09 Specifications

General

Brand	Tru-Test
Model	EC-09
Category	Measuring Instruments
Language	English

Summary

Introduction

Assembly instructions

Operating the plate meter

Switching the unit on and off

How to power the plate meter on and off using the switch.

Front display buttons

Explanation of the two buttons on the unit and their functions.

Zero calibration

Start up/self test

Entering the factory default formula

Other formulas

Seasonal variations of formulas

Formulas based on different pasture growth stages and seasons.

Dairy NZ formulas

Month-based formulas for dairy pastures in New Zealand.

Entering your own formula

Using your plate meter

Principal of use

How the plate meter works to measure grass height and density.

Technique

Proper technique for taking accurate readings with the plate meter.

Farm walk

Taking paddock readings (the pasture walk)

Software

Maintenance

Before use

Checks and actions to perform on the plate meter before use.

After use

Cleaning and care instructions for the plate meter after use.

Replacing the battery

Fault finding

No visual display

Troubleshooting steps for when the plate meter shows no display.

The plate meter continuously beeps and eventually turns off

Resolving issues where the meter beeps and shuts down unexpectedly.

The plate meter does not "beep" when taking a reading

Diagnosing why the plate meter fails to beep on readings.

Readings do not seem accurate

Identifying and fixing inaccurate pasture readings.

Plate meter not running freely (low results)

Troubleshooting mechanical issues causing low results or stiffness.

Front panel (membrane) problems

Addressing issues with the meter's buttons or front panel.

How do I change a formula?

Instructions for selecting or changing the calculation formula.

Warranty and servicing