Make sure your steam mop is cooled down
before attempting to replace the filter.
Press the water tank button and remove the
water tank from main body.
Pull up firmly on the filter until it is released
from the main body.
Place the new filter securely in to the main
body of hte steam mop.
It is recommended that the water filter is
changed every 6 months
1.
2.
3.
4.
5.
The Microfiber mop pads are machine washable.
Wash with warm water and detergent of your choice.
Do not use fabric softener or bleach.
Lay flat to dry.
1.
2.
3.
4.
CARE & CLEANING
REPLACING THE WATER FILTER
CLEANING THE MICROFIBER MOP PADS
After each use, once the steam mop is cooled down, empty the water tank and clean the
external surface of the steam mop with a damp cloth.
Use the cord wrap to safely & securely wrap & store the power cord.
Remove the mop pad and wash it following the instructions below.
Store you steam mop in a dry area.
1.
2.
3.
4.
STORING YOUR STEAM MOP
You can find replacement parts, extra mop pads and water filters at
www.trueandtidy.com
IMPORTANT
：
Allow the steamer to fully cool down before
performing any care & cleaning
To Next Page
Loading...
Need help?
General
