Gas Information
• Any film or stickers on the cooktop surface should be removed before use.
• All operations are performed by means of all control knobs. Knob controls electric ignition, safety
device & flame level.
• TO IGNITE- push and turn the knob for 1-2 seconds in a counterclockwise direction up to the HI
position (Maximum rate), push in and hold the knob until the flame has been lit. The sparks
produced by the internal igniter will light the designated burner.
push and
th
e ob
T
r 1 ~ 2 seconds
• In the event that the local gas supply conditions mark it difficult to light the burner in the HI
position, try again with the knob in LOW position.
• To re-light the burner, return the knob to the OFF position and repeat the operation for light.
• To shut off burner, turn the knob in clockwise direction to OFF position.
To Next Page
Loading...
Need help?
General
