What to do if my True Induction TI-2B Cooktop shows 'EE' error?
If your True Induction Cooktop has been running for 150 minutes straight, its built-in safety feature has activated. To resume cooking, simply press the ON/OFF button to restart the unit.
Why is my True Induction TI-2B beeping but not showing an error?
If your True Induction Cooktop is beeping but not displaying an error code, it's likely due to the cookware you're using. This happens because either the cookware doesn't have ferromagnetic properties or the bottom of the pot is too small. Once you place suitable cookware on the cooktop, the beeping should stop automatically.
What to do if True Induction Cooktop shows E7 error?
If your True Induction Cooktop displays the error code E7, it means the ventilation area is blocked, preventing heat from escaping properly. Here's what to do: 1. Turn off the power. 2. Unplug the cooktop from the outlet. 3. Allow the unit to cool down completely. 4. Ensure there is plenty of ventilation space around the unit. 5. Plug the unit back into the outlet and restart it.
What does E6 mean on my True Induction Cooktop?
The E6 error on your True Induction Cooktop indicates that the cooking temperature has exceeded 450 degrees Fahrenheit in EG TEMP mode. After 3 minutes in standby, the unit will switch off, and you can then restart it.
Why does my True Induction TI-2B Cooktop display E2 error?
If your True Induction Cooktop is showing an E2 error, it means the voltage supply is too high (over 145V). Check the voltage supply to ensure it is below 145V.
What does E1 error mean on a True Induction TI-2B?
If your True Induction Cooktop displays the error code 'E1', it indicates that the voltage supply is too low (under 95V). Check the voltage supply and ensure it is above 95V.
General| Type | Induction Cooktop |
|---|---|
| Number of Burners | 2 |
| Power Levels | 8 |
| Total Power Output | 1800 Watts |
| Surface Material | Ceramic Glass |
| Safety Features | Auto Shut-off, Overheat Protection |
| Voltage | 120 Volts |
| Timer | Yes |
| Control Type | Touch |
Details cut-out dimensions (14 1/4" x 23 3/4") and minimum edge clearance.
Instructions for installing support beams under the cooktop for stability.
Specifies required clearance for proper airflow and cooling.
Essential precautions for safe operation, handling, and electrical safety.
Detailed safety instructions for plug, operation, cleaning, and maintenance.
Lists power, voltage, temperature range, level selection, max time, material, and dimensions.
Explains how burner power levels adjust when both are active.
Details on adjusting cooking temperatures from 150-450°F.
Instructions for setting and using the 5-minute interval timer.
Explains auto shut-off and how to manually turn off the cooktop.
Lists suitable ferrous cookware and incompatible materials.
Steps for safe cleaning, avoiding damage, and vent maintenance.
Explains error codes (E1-E7, EE) and their potential causes/solutions.
To Next Page
