12
Error Code
E1
E2
E3
E4
E5
E6
E7
EE
Unit is on standby mode
but displays no error code
on panel, making an alert
sound.
Cause and Potential Solution
Voltage is under 95V
Voltage is over 145V
The unit may be damaged, contact the seller for support.
The unit may be damaged, contact the seller for support.
The unit may be damaged, contact the seller for support.
The cooking temperature is over 450 degrees Fahrenheit in the
EG TEMP mode. After 3 minutes in standby the unit will switch
o and can then be restarted.
The ventilation area is blocked and heat cannot blow out of the
machine smoothly. This can cause the internal device to over-
heat. Please keep a minimum distance of 2 to 4 inches from the
unit to E7 walls or other barriers. To x the error code, turn o
the power, remove plug from outlet and allow the unit to cool
fully. Allowing for plenty of ventilation space, plug unit back into
outlet and restart.
The built-in safety function indicates that the unit has been on
for EE 150 minutes. The induction cooker will display "EE," make
an alert sound and then go into standby mode. Simply press
the ON/OFF button to restart and resume cooking.
The cookware you are using doesn't have ferromagnetic quali-
ties but displays no error code or the bottom of the pot is too
small. After suitable cookware is on panel, making an used on
the True Induction cooktop, the device will automatically alert
sound. restart.
VII. Compatible Cookware
If the display shows an error code, please reference this sheet for a potential solution:
DOUBLE BURNER TI-2B COUNTER INSETINDUCTION COOKTOP MANUAL REVISED 2.28.17 P.10
To Previous Page
Loading...
Need help?
General
