10
Before installing the cooktop:
1. Visually inspect the cooktop for damage.
2. Place th
e cooktop into the countertop
cutout to ensure it fits properly
The serial plate is located under the
cooktop. When ordering parts or making
inquiries about your cooktop, be sure to
include the model and serial numbers.
Serial plate is located under the burner box of
th
e cooktop.
VI
.
Also make sure all cooktop screws
are
on tight. Recheck all measurements to
ensure they are correct.
Allow a 2" space below the covered cable opening to clear the
electric cable and allow space for installation of the junction
box on the wall at the back of the cooktop.
To Previous Page
Loading...
Need help?
General
