True CS800 Assembly Instructions

Assembly Instructions
11
Instructions for changing units between English & Metric
Treadmill / Bike / Elliptical
1. The HOME screen will appear as shown below on left.
2. Press and hold the upper left corner of HOME screen for about 5 seconds until the logo
on HOME screen begins to flash on and off. Stop pressing left corner.
3. Then press and hold, for about 5 seconds, the MANUAL WORKOUT key in the bottom right corner of
the HOME screen. The MAINTENANCE screen will appear at this point.
4. Press the CONFIGURATION key on the MAINTENANCE screen.
5. Press and highlight “Model” (it maybe highlighted already). See image below on right.
6. Press and highlight “Model number” (it maybe highlighted already) Example: Model Number = CS800.
This example will be used for the remainder of instructions.
7. You will see two arrows and a SAVE key appear. See image below on right.
8. Press the up or down arrow to change “CS800” to “CS800X”. NOTE: The “X” designates a metric units
configured model.
9. Once you have selected the “X” version of your model, press the SAVE key.
10. Units on screen will then change from ENGLISH to METRIC.
11. Press the RETURN key to exit CONFIGURATION screen.
12. Press the EXIT key to return to the HOME screen.
13. NOTE: This same procedure can be used to change units from Metric to English.
WILL FLASH
STEP 2:
PRESS AND
HOLD HERE
STEP 3:
PRESS AND
HOLD HERE
STEP 5 & 6:
PRESS HERE
HOME SCREEN
CONFIGURATION SCREEN
STEP 7:
ARROWS
AND SAVE
KEY

True CS800 Specifications

General

Brand	True
Model	CS800
Category	Exercise Bike
Language	English