True CS800 Assembly Instructions

Assembly Instructions
13
9. The UTILITIES screen will appear as shown.
Press the TV TUNER SETUP key on the
UTILITIES screen.
10. TV TUNER SETUP screen will appear as below.
11. Determine if the video signal source is Analog or Digital and if it is supplied by Cable or Antenna.
Once you have determined this then select the appropriate section below. Verify that you have the
settings below selected on the display. If you have different settings from those listed, then simply
press the TV MODE or TV TYPE keys to scroll through the settings to arrive at the desired setting.
a) For Analog TV (NTSC) by Air
(antenna is source) programming:
i) TV Mode = ATV Air
ii) TV Type = NTSC
b) For Analog TV (NTSC) by Cable
(cable is source) programming:
i) TV Mode = ATV Cable
ii) TV Type = ATV STD (most common setting)
NOTE: Depending on your cable provider
the ATV STD setting may result in zero
channels found. It may be necessary to
adjust your TV Type setting to
TV Type = ATV HRC or TV Type = ATV IRC.

True CS800 Specifications

General

Brand	True
Model	CS800
Category	Exercise Bike
Language	English