To Next PageTo Next Page
Need help?Do you have a question about the True METRIX AIR and is the answer not in the manual?
General| Bluetooth | Yes |
|---|---|
| Test Time | 4 seconds |
| Measurement Range | 20-600 mg/dL |
| Sample Size | 0.5 microliter |
| Automatic Shutoff | 2 minutes |
| Operating Conditions | 50°F to 104°F (10°C to 40°C), 10% to 90% RH |
| Storage Conditions | 39-86°F (4-30°C); 10-90% RH |
| Memory | Up to 1000 results |
Guide on performing a blood glucose test in two simple steps.
Expected blood glucose results for individuals without diabetes before and after meals.
Introduction to the TRUE METRIX AIR system, its purpose, and intended use for self-testing.
Explains the importance of knowing diabetes status and target ranges for blood glucose.
Lists essential precautions, handling test strips, and performing control tests for accurate results.
Details the buttons, display screen, and physical parts of the TRUE METRIX AIR meter.
Explains how to insert and use the test strip correctly with the meter.
Details how to use the control solution for quality checks.
Explains pre-set features and initial checks before first use of the meter.
Describes how to use Event Tags to mark test results with specific events.
Explains the automatic self-test performed by the meter upon test strip insertion.
Provides instructions and reasons for performing control tests.
Step-by-step guide on how to obtain a blood sample from the fingertip.
Instructions and notes for collecting a blood sample from the forearm.
Detailed steps for performing a blood glucose test using the meter and strip.
Instructions on how to tag test results with specific events using the meter.
Information on how fingerstick results compare to laboratory results.
Explains "Lo"/"Hi" messages and the Ketone Test Alert feature.
Steps to set the current time and date on the meter.
Guides on setting up Bluetooth, Event Tags, Ketone Alerts, and Test Reminders.
How to access and view glucose result averages over different periods.
Instructions on how to navigate and view individual test results stored in memory.
Step-by-step guide to pair the meter with a smartphone via Bluetooth.
Procedures for cleaning and disinfecting the blood glucose meter.
Guidelines for cleaning and disinfecting the lancing device.
Instructions on how to replace the meter's battery.
Lists common reasons why the meter may not turn on or start a test.
Addresses Bluetooth connectivity problems and other meter issues not covered by error codes.
Details the meaning of display error codes and their corresponding actions.
Provides detailed technical specifications, chemical composition, and device compatibility.
Explains Bluetooth Smart use, FCC compliance, and potential interference.
Outlines the terms and conditions of the product's limited lifetime warranty.
Information regarding EMC compliance and a list of system components.
Lists the sources referenced in the manual for further information.
A blank page provided for users to make personal notes.
